HP 2920-48G-POE+ Switch HP RENEW J9729A RENEW

HP 2920-48G-POE+ Switch HP RENEW

48 RJ-45 autosensing 10/100/1000 PoE+ ports
4 dual-personality ports
min=0 \ max=4 SFP Transceivers
1 - HPE X332 575W 100-240VAC to 54VDC PS included
1U - Height

44 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only

4 RJ-45 dual-personality 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+)

2 module slots

1 stacking module slot

1 dual-personality (RJ-45 or USB micro-B)

1 USB 1.1

1 RJ-45 out-of-band management port

Frequency

50/60 Hz

80plus.org Certification

Silver

Maximum heat dissipation

399 BTU/hr (420.95 kJ/hr)

Voltage

100 - 240 VAC, rated

Maximum power rating

487 W

Idle power

46 W

PoE power

370 W PoE+

NOTES

Idle power is the actual power consumption of the device with no ports connected.

Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.

PoE power is the power supplied by the internal power supply. It is dependent on the type and quantity of power supplies and may be supplemented with the use of an external power supply (EPS).

370 W of PoE+ power is available using the internal default power supply.